Inner Diameter Grinder
OCN-2000
OCN-2000
■Application : Inner diameter grinding of sleeves
Specifications
Power/Control |
Wire Controlling Motor (AC servo) | AC 200V three-phase 4P 0.8KW |
| Wire Rotating Motor (DC variable speed) | DC 24V 15W | |
| Workpiece Rotating Motor | AC 200V three-phase 2P 0.75KW | |
Number of revolutions |
Wire Rotating Motor (DC variable speed) | ～120rpm |
| Workpiece Rotating Motor | ～3600rpm | |
| Wire Shaft | MAX15m/M | |
Moving Range |
Stroke of Wire Shaft | 1512mm |
| X-direction sliding | ±5mm | |
| Y-direction sliding | ±5mm | |
| Z-direction sliding | ±3mm | |
Operating Devices |
Touch Panel | Input the maximum moving length from starting point. Input the number of revolutions of workpiece and the high speed of wire grinder. Input the moving speed of wire grinder. |
| Switch | Other input items | |
| Pulse Generator | Automatic start, stop, emergency stop, starting point, manual operation of wire grinder. | |
Product Size and Weight |
Size (W×D×H) Not including the projecting part. |
4550×680×1600mm |
| Weight | 1200Kg |
The specifications and appearance of this machine might be changed for further improvement without any notice.
Note) The machine size does not include the protrusion parts.
Rounder
ML-200L
ML-200L
■Processing Size : φ30×200mm
We can process a square rod into a circular cylinder with a centerless blade.
top
bottom
right
left
Specifications
Power/ Control |
Diamond Wheel Shaft | AC 200V three-phase 4P 0.4KW | |
| Diamond Wheel Shaft | AC 200V three-phase 2P 60W | ||
| Diamond Wheel Shaft Variable Speed Controlling System |
AC 200VInverter Control 20～60Hz |
||
| Diamond Wheel Driving System | 2V Belts (type A) | ||
| Rubber Roll Driving System | Timing Belt with Automatic Tensioner | ||
Number of Revolutions |
Diamond Wheel Shaft | 530～1600/rpm(No steps) | |
| Rubber Roll Shaft | 120～360/rpm (Corresponding to the diamond wheel) | ||
| Diamond Wheel | 216m～653m/M | ||
| Rubber Roll | 11m～34m/M | ||
Moving Range |
Vertical Movement of the Blade | 12mm | |
| Horizontal Movement of the Blade | 15mm | ||
| Angle of the Blade | ±6º | ||
| Rubber Roll Slide | 20mm | ||
| Processing Size | Outer Diameter×Length | φ30×200mm | |
Product Size and Weight |
Size(W×D×H) Not including the projecting part. |
700×550×1020mm | |
| Weight | Approx. 230Kg | ||
The specifications and appearance of this machine might be changed for further improvement without any notice.
Note) The machine size does not include the protrusion parts.
Ball Grinding Machine
BOY-200/300
BOY-200
■Processing Size : φ0.5～10mm
■Faceplate Size : φ200
BOY-300
■Processing Size :φ0.5～15mm
■Faceplate Size :φ300
Specifications
Processing volume |
Processing range (ball size) | BOY-200 : φ0.5～10mm BOY-300 : φ0.5～15mm |
|
| Faceplate Pressure | 0～50kg | ||
| Faceplate Size | BOY-200 : φ200mm / BOY-300 : φ300mm | ||
Power |
Upper Faceplate Motor | AC 200V/90W | |
| Lower Faceplate Motor | AC 200V/200W | ||
| Upper Faceplate Rocking Motor | AC 200V/90W | ||
| Arm Motor | AC 200V/40W | ||
| Coolant Pump |
AC 200V/60W | ||
Moving Range |
Rocking (linear) | 70mm | |
| Upper Faceplate Spindle | 14mm | ||
| Upper Faceplate Arm | 45' | ||
Number of Rotation |
Upper Faceplate Shaft | 0～120/rpm | |
| Lower Faceplate Shaft | 0～200/rpm | ||
| Rocking Shaft | 0～60/rpm | ||
Control |
Time counter | Stops at a setting time. | |
| Rotation Counter | Stops at a setting number of rotation. | ||
| Upper Faceplate Arm | Ascends 45' at the time of automatic stop. | ||
| Manual Operation | Starts and Stops each motor. | ||
The specifications and appearance of this machine might be changed for further improvement without any notice.
Note) The machine size does not include the protrusion parts.
BOY-400
BOY-400
■Processing Size : φ0.5～20mm
■Faceplate Size : φ400mm
Grinding pressure can be freely changed by adjusting air.
Specifications
Processing volume |
Processing range (ball size) | φ0.5～20mm | |
| Faceplate Pressure | 0～50kg | ||
| Faceplate Size | φ400mm | ||
Power |
Upper Faceplate Motor | AC 200V/90W | |
| Lower Faceplate Motor | AC 200V/200W | ||
| Upper Faceplate Rocking Motor | AC 200V/90W | ||
| Arm Motor | AC 200V/40W | ||
| Coolant Pump | AC 200V/60W | ||
Moving Range |
Rocking (linear) | 70mm | |
| Upper Faceplate Spindle | 14mm | ||
| Upper Faceplate Arm | 45' | ||
Number of Rotation |
Upper Faceplate Shaft | 0～130/rpm | |
| Lower Faceplate Shaft | 0～200/rpm | ||
| Rocking Shaft | 0～56/rpm | ||
Control |
Time counter | Stops at a setting time. | |
| Rotation Counter | Stops at a setting number of rotation. | ||
| Upper Faceplate Arm | Up | ||
| Manual Operation | Starts and Stops each motor. |
||
Product Size and Weight |
Size (W×D×H) Not including the projecting part. |
610×1010×1600mm | |
| Weight | 700kg | ||